Bale King 6200 Multi-Bale Processor


Bridgeview HomeBale King Bale Processors → 6200 Multi-Bale Processor


6105

 

Cut your feeding and bedding time by more than half!

Bridgeview’s Bale King 6200 Multi-Bale Processor!

The 6200 processor is the new and improved 6105 available in 2017. It carries 6 bales at once, three times more than a conventional processor!

The cleated 2082 chain and big flotation skid shoes slide easily under the bale (without digging into the ground) for fast and clean loading.

The 6200 is built on the proven technology of the popular 5100 and features our patented and reliable X-Rotor for easy twine removal.

Save time, fuel, and wear and tear with the 6200, perfected over 15 years of use on Nebraska ranches. The 6200 is available from one of our many dealers and can be shipped worldwide!

Call Bridgeview for more information on the Bale King 6200.


Standard Features


6105 abc
A) The Bale King 6200 is built on the proven processing power of our most popular 5100 processor. The super-durable tub handles a 6.5′ round bale with room to spare and is protected by high-quality powder coat paint.

B) The loading forks throw even heavy bales into the tub with ease. Fine control allows accurate bale placement. The forks sit well below chain level to prevent hangups with old or sagging bales.

C) Twin Torflex axles, a low deck height, and wide wheelbase combine to give exceptional stability on rough ground. 14L x 16.1 flotation tires give a smooth ride and are low maintenance.


6105 def

D) Dual 3″ lift cylinders are strong enough for the wettest and heaviest bales, with strength to spare!

E) High-torque chain drive motors give the operator confidence and fine speed control when loading without compromising lifting power.

F) Like every Bale King processer, the 6200 comes with red/amber road lights and reflectors and SMV signage. Comes equipped with a standard 7-pin male trailer plug.


6105 ghi
G) High-quality loading chain idlers are meant to last for the life of the machine with proper maintenance and are adjustable for optimal chain tension.

H) Self-loading, cleated 2082 chain grabs hard into straw to easily load even the last bale in the row. The chain is canted inward for a positive grip on various bale sizes.

I) Wide, low profile skid shoes get the chain and idlers underneath the bale without digging into the ground.


6105 JKL
J) Processing aggressiveness is easily adjusted by moving the lockable hoop grate up and down. The the hoop grate is properly set, processing time will be 90 – 120 seconds per bale.

K) The 6200 features a beltless design, alleviating a common failure mode of other processors. All moving parts are driven by a direct hydraulic or PTO connection.

L) Rotary agitators with big paddles grip deep into the bale to turn it more reliably than chains or cradles, helping to prevent bridging.


6105 mno
M) Removing twine from a round rotor can be extremely frustrating. All Bale king processors feature the patented X-Rotor for easy twine removal. As twine wraps on the rotor, it bridges across the X-shape, allowing easy insertion of the standard twine cutter, or of any knife or iron.

N) Bale King heavy-duty 3/4″ flails are welded to their bushings, not formed like the other guys do it. Flail tip speed is up to 7,000 feet per minute during processing!

O) Every X-Rotor undergoes a serious QC regimen before it leaves Bridgeview. Each rotor is harmonically balanced to minimize noise and vibration during operation and to maximize processing speed.


6105 PQR
P) Hydraulic deflector allows switching between bunk feeding mode and long range bedding mode without leaving the cab! Folds up for a narrow transport width. Right-hand discharge puts the action on the same side as your controls for less operator fatigue.

Q) The 6200’s tapered hitch allows tighter turns than possible with a straight hitch. Three clevis positions match your tractor’s hitch height to keep the unit nice and level.

R) Only 3 hydraulic remotes are needed for full control of the 6200 when used with the provided control box. 1/2″ Standard Male Hydraulic Ag Tips (Pioneer-style) come installed.


Options


6105 Fine Chop
Fine Chop Kit – The Fine Chop Kit is an option available when ordering your 6105 processor and adds the adjustable ability to chop material even finer!

The kit adds a row of adjustable-height knives which protrude into the rotor chamber for exceptional control of processor aggressiveness.

The Fine Chop Kit is highly desirable when processing long greenfeed or silage. Need to process straw? Dropping the knives to their lowest level (no tools required!) returns the processor to the stock setting.

The Fine Chop Kit can be installed by the user or can be installed to order. Contact Bridgeview for more information.

 


Specifications


 

All specifications are also available in the 6200’s Operator’s manual. Contact Bridgeview for more information.

 

Bale King 6105 Multi-Bale Processor – Dimensions
Overall Weight 9,061 lb 4110 kg
Drawbar Weight 3,285 lb 1490 kg
Overall Height 105″ 2.67 m
Overall Length 462″ 11.7 m
Overall Width (Deflector Folded) 102″ 2.59 m
Overall Width (Deflector Up) 118″ 3.00 m
Overall Width (Deflector Down) 135″ 3.43 m
Tread Width (On Centers) 79-1/4″ 2.01 m
Tub Opening 80″ x 91″ 2.03 m x 2.31 m
Rotor Extended Tip Diameter 27″ 0.69m
Discharge Opening 12″ x 80″ 0.30 m x 2.03 m
Cylinders
Dual Hydraulic Lift Cylinders (Back Forks) 3” x 18” x 1-1/2″ Rod
Single Hydraulic Deflector Cylinder 1-1/2″ x 6″ x 3/4″ Rod
Dual Hydraulic Lift Cylinders (Deck) 4″ x 14″ x 2″ Rod
Tires
Tire Size 14L-16.1SL 12-Ply
Tire Inflation 25 psi (170 kpa)
Wheel Nut Torque 125 ft-lb (170 N•m)
Operating Specifications
Minimum Power Requirement 80 – 150 hp (60 – 110 kW) @ Power Take-Off (PTO)
Required Number of Hydraulic Remotes 3 with Diverter Control Box
Hydraulic Couplings 1/2″ Standard Ag Tip (Pioneer Tips)
Rated PTO Speed 1000 RPM
PTO Shaft Type Weasler: Cat. 6 80 deg. C.V.
PTO Shear Bolt 3/8″ x 2” Gr. 5
Flail Tip Speed at 1000 RPM PTO Speed 7000 FPM
Rotor and Agitators
Number of Flails 28
Flail Size 3/4″ x 1-1/2″ x 7″
Flail Bushings Oil Impregnated Bushings in Flails
Rotor Shaft Bearing 1-15/16” Bearing
Agitator Shaft Bearings 1-3/4” Bearings
Twine Guard Disc Type Twine Guard
Gearbox
Gearbox Oil GL5 80W90
Gearbox Oil Capacity 500 mL (16 U.S. fl. oz.)

 


Manuals and Media


 

Bale King 6105 – Operator’s and Parts Manual Download
Bale King 6105 – Shipping Assembly Manual Download
Bridgeview Warranty Registration Form Download
Bridgeview Warranty Claim Form Download
Bridgeview Warranty Information – Bale King Download

 


Video



Gallery


6105 loaded                 6105 empty

6105 fine chop                 6105 x rotor

6105 skids                 6105 rear

6105 front                 6105 top

6105 hitch                      6105 top

6105 torflex                      6105 chain drive

6105 forks                      6105 chains

6105 loading

 

 

 


Other Bale King Products


512581008100GT40

Contact


For more information on Bale King products, contact Bridgeview:

Bridgeview Manufacturing Inc.
Box 4 Hwy 22
Gerald, SK
S0A 1B0

Phone: 1(306)7452711
Fax: 1(306)7453364

For sales and service, contact your local dealer.

Proudly manufactured in Saskatchewan by Bridgeview Manufacturing Inc.