Pulldozer PD 1220 Scraper Pan

Pulldozer 1220 Land Scraper

Bridgeview HomePulldozer → 1220 Ejector Scraper


Now Available 2017, the 20-yard Pulldozer 1220 Ejector-Style Land Scraper!
No piece of equipment takes as much abuse as a scraper; big rocks and hard pulling test these earth-movers during every moment of their operation.
With this philosophy in mind, Bridgeview designed every aspect of the 1220 for absolute dependability.
Strategically placed high-strength and hardened steel is meant to last for the life of the machine. The high-backed ejector plate prevents rocks from wedging between the tires and frame.
Clever hydraulic hose and cylinder concealment and a clean, smooth design prevent protect the most sensitive components of the scraper.

Standard Features

1220 Top View

A) The 1220 features a 20-yard hopper and 12′ cutting width. The high-backed ejector helps prevent rocks from jamming between the frame and tires and protects the cylinder compartment from material buildup.
B) The standard GPS tower sits directly over the blade, meaning that only an elevation correction in software is needed. The tower is easily removed to accommodate excavator filling if desired.
C) The standard nitrogen-filled hydraulic dampener provides a better ride for the operator and smoother cylinder function.

1220 Rear View

D) Twin 875/65R29 tires reject mud buildup better than 4- or 6-wheeled scrapers. The 132″ outside tire width floats gives good stability on slopes and uneven ground. The tail section’s removable panel allows easy pressure-washing of the cylinder compartment. The open tail bottom permits total cleanout.
E) The heavy-duty 3″ ejection cylinder pushes the ejector plate slightly past the blade edge for total hopper cleanout. Ultra-High Molecular Weight Polyethylene (UHMW-PE) bearing surfaces reduce metal-on-metal sliding contact and resist jamming by gravel. Ejector/apron sequencing is automatic on one remote.
F) Twin 2″ apron cylinders are shielded from rock impact yet remain accessible for quick inspections. The frame tubing access panels are easily removed for fast checks of the internally-routed hydraulics.


G) The standard replaceable dropped-center serrated blades pull the center of the 1220 deeper and more evenly into the ground. Straight blades are also available as standard.
H) The strategically-placed hardened steel of the 20-yard hopper is protected by high quality powder-coat paint. The clean-faced internal design prevents snagging damage when ejecting big rocks or gravel.
I) Like all pins on the 1220, the 3-5/8″ cold-rolled lift pivot pin will withstand loads far exceeding those expected in the harshest operating conditions.

1220 HITCH

J) Standard 3/4″ Male Ag Tips (Pioneer Style) come installed. Two hydraulic remotes are required.
K) The six-way semi-mount provides a wide range of motion.
L) Unlike other scraper hitches, the standard 1220 hitch allows easy yoke connections while installed, saving significant time when changing implements.



All specifications are also available in the 1220’s Operator’s manual (Coming soon). Contact Bridgeview for more information.


Pulldozer 1220 Land Scraper – Dimensions
Recommended Tractor Power 400+ hp 300+ kW
Approximate Dry Weight 28,000 lbs 12700 kg
Overall Dimensions 143-1/2″ Wide x 400″ Long 3.64 m Wide x 10.16 m Long
Turning Length (Tire Center to Hitch Pin) 324″ 8.23 m
Outside Tire Width 132″ 3.35 m
Height @ Max. Elevation (Approx.) GPS Tower Removed – 109″ (2.77 m) GPS Tower Installed – 142″ (2.72 m)
Capacity – Struck 14 yd3 10.7 m3
Capacity – Nominal 20 yd3 15.3 m3
Capacity – Heaped 22 yd3 16.8 m3
Bowl Internal Dimensions (Approx.) 132″ Wide x 98″ Long x 50-1/2″ Deep 3.35 m Wide x 2.49 m Long x 1.28 m Deep
Unit Weight on Hitch Empty – 26% Heaped – 28%
Lights and Marking 7-Pin Male Trailer Plug Red/Amber Lights & Decals, SMV Sign
Hitch Style 6-Way Semi-Mount
Hitch Articulation 35° Left/Right of Center 23° Up
Tires 2 x 875/65R29
Tire Capacity (Each) 34,200 lbs 15500 kg
Blade Options (Either Standard) Serrated Blade, Hardened, Dropped Center Straight Blade, Hardened, Dropped Center
Blade Width 131-1/2″ 3.34 m
Blade Angle 30°
Number of Blade Sections Three – Left, Right, and Center (All Replaceable)
Hydraulic Remotes Needed 2 (One for Tilt, One for Ejector/Apron)
Ejector/Apron Sequencing Automatic on One Remote
Hydraulic Dampening Nitrogen-Filled Piston Accumulator
Apron Cylinders 2 x 32 x 4 (Qty. 2)
Lift Cylinders 3 x 20 x 6 (Qty. 2)
Ejector Cylinder 3 x 60 x 5 (Qty. 1)
Hydraulic Fitting 3/4″ Standard Male Ag Tip (Pioneer Tip)
Other Features
Removable GPS Tower Centered 115-1/2″ (293 cm) Over Blade 7″ x 7″ (17.8 cm x 17.8 cm) for Receiver
Finish Powder Coat Paint


Manuals and Media


Pulldozer 1220 Brochure – Page 1/2 Download
Pulldozer 1220 Brochure – Page 2/2 Download
Pulldozer 1220 Land Scraper – Operator’s and Parts Manual Download
Pulldozer 1220 Land Scraper – Warranty Information Download
Bridgeview Warranty Registration Form Download
Bridgeview Warranty Claim Form Download



PD 1220 Front

PD 1220 Top

PD 1220 Apron Up

PD 1220 Man Scale

PD 1220 Plate Forward

PD 1220 Rear

PD 1220 Hydraulic Access

PD 1220 Angle Indicator

PD 1220 Apron Down

PD 1220 Apron Up

PD 1220 U-Joint Hitch

PD 1220 Scraping

PD 1220 Dumping

PD 1220 Full

PD 1220 Dampener


Other Pulldozer Products

1810/24101850/2450 Transformer


For more information on Pulldozer products, contact Bridgeview:

Bridgeview Manufacturing Inc.
Box 4 Hwy 22
Gerald, SK
S0A 1B0

Phone: 1(306)7452711
Fax: 1(306)7453364

For sales and service, contact your local dealer.

Proudly manufactured in Saskatchewan by Bridgeview Manufacturing Inc.